Arcom ZyWAN Manuel de service télécharger pdf (Page 17)

Installation and Setup

SM-1H1.0002, Rev. 1, July 2009 3-1

3. INSTALLATION AND SETUP

This section provides detailed instructions for the proper installation and setup of the TransPortal

Interface Monitor (TIM). Included are steps to perform the following:

1. Gather the tools and devices needed for installation.

2. Unpack and inspect the TIM.

3. Mount the TIM.

4. Connect the field wiring.

5. Connect the power source and power up the unit for the first time.

You are encouraged to read this section in its entirety before attempting installation of the TIM.

3.1. Needed for Installation

There are several important tools and devices necessary to properly install the TIM:

1. Drill and appropriate drill bits for creating a 3/8-inch hole for mounting the TIM.

2. A small screwdriver with a 1/8-inch (or smaller) blade for securing wiring in the TIM

terminal strips.

3. A digital volt meter to verify power connections and monitored input connections.

4. A Windows-based computer to configure the unit using the embedded web server. The

computer should use either an Internet Explorer (version 6 or later) or Mozilla Firefox

(version 2 or later) browser. Other browsers may be used, but may not work as described

in this document.

While the basic operating information and status of inputs can be accessed over the

WAN, it is strongly recommended that a browser-equipped computer be used to

configure the unit in the easiest and most comprehensive manner.

3.2. Unpacking and Inspecting the Unit

The basic TIM package typically contains the following items in addition to the unit:

1. CAT5 Crossover Network Cable (for connecting a browser-equipped Windows computer

to the unit's embedded server configuration applications)

2. TIM Service Manual (this document)

Great care is taken in packaging each item to prevent damage in shipment; however, damage can

sometimes occur and it is not advisable to install or attempt to operate damaged equipment or

equipment with suspected damage. Carefully inspect each package at time of receipt for signs of

physical damage. Report any suspected damage claims to the shipper and to Customer Support.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 51 52

Pas de commentaire

Arcom ZyWAN Manuel de service Page 17