Arcom ZyWAN Manuel d'utilisateur télécharger pdf (Page 46)

ZyWAN User Manual Configuring the ZyWAN

Networking configuration

The Networking tab looks like this:

The following items must be configured in order to enable the port forwarding, network

address translation or NTP services:

Enable port forwarding?

Select Yes if you wish to forward individual IP ports. If a host connection comes in on

one network interface at a given port, its communication is redirected to the IP address

and port number on one of the ZyWAN interfaces.

If Enable Port Forwarding is set to Yes, the Networking tab looks like this:

Changes made to the Port Forwarding and NAT portions of the Terminal Client

page take effect immediately after submitting changes, without requiring a

reboot.

The following buttons are available:

Button Explanation

Insert Row#

Each of the table rows is numbered. In order to insert a

row in the table, enter a number in the box between 1 and

one greater than the highest number of rows. Then click

the Insert Row# button to insert a blank row. This row

needs to be filled in with all data required.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 75 76

Pas de commentaire

Arcom ZyWAN Manuel d'utilisateur Page 46