Arcom ZyWAN Manuel d'utilisateur télécharger pdf (Page 62)

ZyWAN User Manual Configuring the ZyWAN

The screen offers the following fields and options:

Field/Option Explanation

IP Address

Enter the specific numeric address for ZyWAN. Each of

the four fields must be a number between 1 and 255.

Subnet Mask

Enter the subnet mask for this Ethernet network. Each of

the four fields must be a number between 0 and 255.

Default Gateway

Enter the numeric address of the default gateway for this

network. Each of the four fields must be a number

between 1 and 255.

Preferred DNS Server

Enter the primary DNS server address. Each of the four

fields must be a number between 1 and 255. If DNS is not

needed or the server is unavailable, the DNS address

may be set to 0.0.0.0.

Alternate DNS Server

Enter the secondary DNS server address. Each of the

four fields must be a number between 1 and 255. If DNS

is not needed or a secondary DNS server is unavailable,

the DNS address may be set to 0.0.0.0.

Run DHCP Server

This option is available when the Mode is ad-hoc or

master. This allows the ZyWAN is to act as a DHCP

server on the WiFi network, assigning network addresses

to other devices. Set this to No if this option is not used.

If Run DHCP Server is set to Yes, the DHCP Server Configuration table is displayed:

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 113 114

Pas de commentaire

Arcom ZyWAN Manuel d'utilisateur Page 62