Arcom ZyWAN Manuel d'utilisateur télécharger pdf (Page 70)

ZyWAN User Manual Configuring the ZyWAN

If Time Synchronization is set to NTP, a Table of NTP Servers is available which looks

like this:

The following buttons are available:

Button Explanation

Insert Row#

Each of the table rows is numbered. In order to insert a row

in the table, enter a number in the box between 1 and one

greater than the highest number of rows. Then click the

Insert Row# button to insert a blank row. This row needs to

be filled in with all data required.

Delete Row#

In order to delete a row in the table, enter a number in the

box between 1 and the highest number of rows. Then click

the Delete Row# button to delete the row. Once a row is

deleted, it cannot be restored without inserting a row and

entering the data again.

If the clock is not retained after loss of power, it may

either be that the battery jumper (LK2 on the main

circuit board) is not fitted, or that the coin cell battery

has failed and needs to be replaced.

The screen offers the following fields:

Field Explanation

Add NTP Servers to

the following list:

Enter the network address of one or more NTP servers to

use for synchronizing the date and time.

NTP Servers to Use (IP

address or FQDN)

Enter either the numeric address or named address (Fully

Qualified Domain Name, FQDN) where the NTP server

exists. Insert additional rows if more NTP servers are

desired.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 113 114

Pas de commentaire

Arcom ZyWAN Manuel d'utilisateur Page 70