Arcom ZyWAN Manuel d'utilisateur télécharger pdf (Page 85)

ZyWAN User Manual Configuring the ZyWAN

The Host Connection Table looks like this:

The following fields and options are available for each row of the Host Connection

Table. Multiple rows may be added if necessary:

Field/Option Explanation

Remote IP Port

Enter the port number (between 1 and 65535) to which the

Terminal Client connects. The same port number is used to

attempt connections to each of the three IP Addresses, if

configured. There is no option to connect to different port

numbers for each address in the Host Connection row.

Disconnect Mode

Select when to disconnect from the remote address. In any

case of a session disconnect, the Connect Mode (above)

determines how a reconnection occurs. Options available

are:

On +++: Disconnect if the characters +++ (and no more

than three + characters) are received on the serial port

within the Demark Time. This emulates the modem attention

string often used prior to hanging up a dial connection.

On Dropped DCD: Disconnect when the Data Carrier Detect

(DCD) input on the serial port goes to a low (inactive) state.

Either: Disconnect either on receiving +++ at the serial port

or on an inactive serial DCD line.

Neither: Never disconnect from the remote server.

Connections may still be lost due to the remote side

dropping its connection or because of network interruptions.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 113 114

Pas de commentaire

Arcom ZyWAN Manuel d'utilisateur Page 85