Arcom ZyWAN Manuel d'utilisateur télécharger pdf (Page 91)

ZyWAN User Manual Configuring the ZyWAN

The Serial Ports Table is part of the Terminal Server configuration. At least one row

must be configured in the Serial Ports Table for it to work properly:

The following buttons are available:

Button Explanation

Insert Row#

Each row of the Serial Ports Table contains the definition of a

serial port to use for this Terminal Server configuration. One

Terminal Server may send data received from the network client

to multiple serial ports simultaneously. In order to insert a row in

the table, enter a number in the box between 1 and one greater

than the highest number of rows. Then click the Insert Row#

button to insert a blank row. This row must be filled in with all data

required.

Note that when adding or deleting rows of a Serial Ports Table,

make sure to click the Insert Row# or Delete Row# buttons

within the brown section of the Serial Ports Table, not the buttons

at the very bottom of the main table.

Delete Row#

In order to delete a row of the Serial Ports Table, enter a number

in the box between 1 and the highest number of rows. Then click

the Delete Row# button to delete the row. Once a row is deleted,

it cannot be restored without inserting a row and entering the data

again.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 113 114

Pas de commentaire

Arcom ZyWAN Manuel d'utilisateur Page 91