Arcom ZyWAN Manuel d'utilisateur télécharger pdf (Page 63)

ZyWAN User Manual Configuring the ZyWAN

The screen offers the following fields and options:

Field/Option Explanation

Default Lease Time

Enter the Default Lease Time (in seconds) for the

assigned DHCP lease to expire. The default time is the

time assigned if the client does not request a specific

lease time.

Max. Lease Time

Enter the maximum lease time (in seconds). This is the

maximum lease time which is assigned, regardless of

whether the client has requested a longer lease time.

Subnet Mask

Enter the Subnet Mask defining the range of network

addresses to be assigned by this DHCP server. Each of

the four fields must be a number between 0 and 255.

Range From

Enter the numeric address of the lowest DHCP address to

be assigned by this DHCP server. Each of the four fields

must be a number between 1 and 254.

Range To

Enter the numeric address of the highest DHCP address

to be assigned by this DHCP server. Each of the four

fields must be a number between 1 and 254.

Pass DNS Servers to

DHCP Clients

Set this option to Yes if you want the configured DNS

server addresses to be given to other computers receiving

their network address from the ZyWAN using DHCP.

If the Run Dhcp Server option is set to Yes, then UDP

port 67 must be included in the “Open Ports” section

of the Networking page.

If Pass DNS Servers to DHCP Clients is set to Yes,

UDP port 53 must be included in “Open Ports”.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 113 114

Pas de commentaire

Arcom ZyWAN Manuel d'utilisateur Page 63